Good Performance Gearbox ATA Series Shaft Mounted Gear Reducer

Product Description

Good Performance Gearbox ATA Series Shaft Mounted Gear Reducer

Components:

1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed Solid Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: TAIWAN SOG
11. Bearings: NSK,  HRB, ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop

The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select three hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It's very convenient to be mounted.

The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After three months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.
 

Rated Power	1.1~193KW
Intput Speed	500~1400r/min
Output Speed	25~300r/min
Ratio	IN=5.0...31.5
Installation Form	Shaft mounted

The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D

Gearbox Parameters:

Models	Output Bore Dia.	Maximum Torque	Nominal Ratio(i)
ATA30	30mm	180Nm	5 7 10 12.5 15 20 25 31
ATA35	35mm	420Nm
ATA40	40mm/45mm	950Nm
ATA45	45mm/50mm/55mm	1400Nm
ATA50	50mm/55mm/60mm	2300Nm
ATA60	60mm/70mm	3600Nm
ATA70	70mm/85mm	5100Nm
ATA80	80mm/100mm	7000Nm
ATA100	100mm/125mm	11000Nm
ATA125	125mm/135mm	17000Nm

 

Product pictures:
 

Product application:


Our company :



Customer visiting:


Our Services:

Pre-sale services	1. Select equipment model.
	2.Design and manufacture products according to clients' special requirement.
	3.Train technical personal for clients
Services during selling	1.Pre-check and accept products ahead of delivery.
	2. Help clients to draft solving plans.
After-sale services	1.Assist clients to prepare for the first construction scheme.
	2. Train the first-line operators.
	3.Take initiative to eliminate the trouble rapidly.
	4. Provide technical exchanging.

FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than one hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set

If you have any demand for our products please feel free to contact me